JULY 1 THROUGH DECEMBER 31, 1996
STUMPAGE VALUE AREAS
6 and 7
CLICK HERE FOR STUMPAGE VALUE TABLES:
Use the attached tables to complete your Forest Excise Tax Return. Refer to the Tax Reporting Instructions included here for additional information. If you have questions or need assistance, CONTACT THE DEPARTMENT OF REVENUE, SPECIAL PROGRAMS DIVISION, FOREST TAX SECTION IN OLYMPIA, TOLL-FREE 1-800-548-8829.
DEPARTMENT OF REVENUE
SPECIAL PROGRAMS DIVISION
FOREST TAX SECTION
STANDARD DETAIL SHEET
A separate Detail Sheet must be completed for each different Forest Practice Application (Permit) Number, section, and harvest unit.
The following items correspond to the blocks on the standard Detail Sheet:
Quarter/Year. Enter the quarter and year being reported.
Page Number. Enter the page number on each Detail Sheet.
BLOCK 1. Harvester's Name. Enter the name of the harvester. On private land, the harvester is the timber owner.
BLOCK 2. Landowner's Name. Enter landowner's name.
BLOCK 3 through BLOCK 9. Transfer the information from the Summary Sheet.
BLOCK 10. Harvest Unit Number. A harvest unit is an area of proposed timber harvest, defined and mapped by the harvester before harvest. A harvest unit number is an number assigned by the harvester to a harvest unit having only one: county, stumpage value area, haul zone, harvest adjustments, and harvester. If any of the above circumstances vary within a given harvest operation, the area must be divided into separate harvest units, with an individual number assigned. A harvest unit may include parts of more than one section. The harvest unit number assigned must remain the same until the harvest is completed. The harvester must maintain a separate set of records for each designated harvest unit for tax reporting purposes.
BLOCK 11. Harvest Adjustments make allowance for varying harvest conditions. Value adjustments relating to harvest volume per acre, logging conditions, thinning, damaged timber, and remote island are allowed against stumpage value rates.
No harvest adjustment is allowed for Chipwood (CHW), Small Logs (SML), Western Redcedar Shakes (RCS), Western Redcedar Flatsaw (RCF), Lodgepole Pine Posts (LPP), Douglas-fir Christmas Trees (DFX), or Pine Christmas Trees (PX).
The harvest adjustment schedule for SVAs 6 and 7 is listed in the following pages.
A. Harvest Volume Per Acre. Determine the average volume per acre harvested (excluding Chipwood and Small Logs) within each harvest unit for the reporting quarter.
Divide the total volume harvested (excluding Chipwood and Small Logs) by the number of acres logged for this quarter only. Volume should be rounded to two decimal places (0.00).
For example, if, for the quarter, the total volume harvested is 97 MBF, logged from 19 acres, divide 97 by 19, which equals 5.11 MBF per acre.
Enter the average volume per acre in the "Volume" column. Enter the class number in the "Adjustment Class" column. Enter the dollar amount in the "Adjustment Amount" column.
B. Logging Conditions. Determine from the definitions given in the adjustment tables on page 10 the class of logging conditions in the harvest unit. The logging condition is the majority condition for the harvest unit (as explained in Block 10). A separate Detail Sheet must be completed for each harvest unit.
A special logging condition adjustment is provided for timber which is yarded from the stump to the landing by helicopter. This adjustment does not apply to Special Forest Products, Chipwood, or Small Logs.
Enter the class number in the "Adjustment Class" column. Enter the dollar amount in the "Adjustment Amount" column.
C. Not Applicable.
E. Damaged Timber Adjustment. Application for any damaged timber determination must be made prior to harvest. For more information call 1-800-548-8829.
F. Remote Island Adjustment. A remote island is an area of land which is totally surrounded by water at normal high tide and which has no bridge or causeway connecting it to the mainland.
For timber harvested from a remote island, enter the dollar amount from the Adjustment Table in the "Adjustment Amount" column.
G. Total Adjustment Amount, Block 11, Line G. Enter total in "Adjustment Amount" column for lines A through F. Also enter the Total Adjustment amount in Block 15, Column E for each species. No adjustment can be made to the Stumpage Value Table for Chipwood (CHW), Western Redcedar Shakes (RCS), Western Redcedar Flatsaw (RCF), Lodgepole Pine Posts (LPP), Douglas-fir Christmas Trees (DFX), or Pine Christmas Trees (PX).
BLOCK 12. Check Log Scale Method Used.
APPROVED SCRIBNER LOG SCALING & GRADING RULE
Eastern Washington (SVA's 6 & 7)
The acceptable log scaling and grading rule is the Scribner Decimal C log rule. For a complete description of standard methods and procedures, refer to the most current edition of the "National Forest Log Scaling Handbook" (FHS 2409.11). Copies can be obtained from the U.S. Forest Service.
The maximum scaling length is twenty feet and a maximum trim allowance is six inches for logs eight to twenty feet in length.
Alternative procedures or Special Services Scaling are not to be used without prior written approval from the Department of Revenue.
CONVERSION DEFINITIONS AND TABLES
Refer to the Stumpage Value Determination Tables (WAC 458-40-686) for conversion procedures to be used for timber not originally scaled by approved Scribner Decimal C log scale rule, such as weight or cords, etc. Sample scaling or conversion factors (other than the published tables) require written approval prior to harvest. To be approved, sample scaling must be in accordance with guidelines contained in WAC 458-40-682.
Enter a checkmark in the box to the left of the scaling method used.
BLOCK 13. Number of Acres Logged This Quarter. Enter the number of acres actually logged this quarter only for this harvest unit.
BLOCK 14. Is Harvesting Completed for Harvest Unit? The correct box must be checked.
BLOCK 15. Taxable Stumpage Value Calculation. The Timber Quality Code Table and the Stumpage Value Table are in the following pages.
COLUMN A. Species Code. Enter the species codes as they are listed on the Stumpage Value Table. (Example: Douglas Fir - DF; Ponderosa Pine - PP; Lodgepole Pine and Other Posts - LPP).
If you harvest other conifer species that are not listed in the Stumpage Value Tables, report them as OC (Other Conifer).
If you harvest hardwood species that are not listed in the Stumpage Value Tables, report them as OH (Other Hardwood).
COLUMN B. Quality Codes. These are determined by the number of sawable sixteen-foot logs per thousand board feet (MBF) net Scribner Decimal C log scale. This computation is made by the following three-step procedure:
Step 1. The highest possible total number of sawable sixteen-foot logs which could be recovered is determined by dividing the sum total length of all sawable logs by the number sixteen.
Step 2. The average net volume per sixteen-foot recoverable log is determined by dividing the total volume harvested (net log scale) by the total number of sixteen-foot logs as determined in Step 1.
Step 3. The total number of logs per thousand board feet (MBF) is determined by dividing one thousand by the average net volume as determined in Step 2. Refer to the "Timber Quality Code" tables and select the correct code.
COLUMN C. Volume Harvested. Enter the net volume of each species harvested during the quarter. All volumes must be rounded to the nearest thousand board feet (MBF). For example: 15,499 BF, enter as 15 and 15,500 BF enter as 16. All species having at least 500 board feet (rounded to 1 MBF) must be reported. For tons to MBF conversions see WAC 458-40-684 at the end of this document.
All volume except for Christmas trees, posts, Chipwood, and Small Logs must be reported in Scribner Decimal C log scale. Christmas trees are reported in lineal feet. Posts are reported in number of posts (8 lineal feet per post). Chipwood and Small Logs are reported in tons.
Add lines 1 through 9 of Column C and enter this total on line 10.
COLUMN D. Stumpage Value. Enter the stumpage value for the correct species, quality code and haul zone from the Stumpage Value Table.
COLUMN E. Total Adjustment Amount. This is the amount transferred from Block 11, Line G as an adjustment to the stumpage value for all sawlog species reported.
COLUMN F. Adjusted Stumpage Value. Enter the amount determined by subtracting the adjustment amount from the stumpage value (Column D minus Column E equals Column F). This value cannot be adjusted to less than $1.00 per MBF.
COLUMN G. Taxable Stumpage Value. Multiply the volume in Column C times the adjusted stumpage value in Column F and enter the figure in Column G. (Column C times Column F equals Column G).
BLOCK 16. Chipwood and Small Log Value Calculation. Utility grade logs scaled by approved DOR scaling methods may be reported as Chipwood. Logs delivered to DOR approved destinations for the purpose of being chipped may be reported as Chipwood. The volume of Chipwood shall be reported in tons. The documentation shall be retained to show that the logs sold were "chip", "pulp", or "fibre" type logs. Logs chipped in the woods may also be reported as chipwood. The volume of logs chipped in the woods shall be measured in tons of green chips and sufficient documentation of volume shall be retained for verification of reporting. The Species and Timber quality code is printed on the return and the value found in the following table. Small log (SML) value applies only in SVA-6 and SVA-7.
COLUMN C. Tons Harvested. Enter the total Chipwood and Small Logs tons for all species harvested during the quarter. All volumes must be reported in tons rounded to the nearest ton. For example: 31,000 pounds, enter as 15 and 31,001 pounds enter as 16. All species having at least 1001 pounds (rounded to 1 ton) must be reported. All scaled utility (Code 99) volume shall be multiplied by 9 to convert from MBF to tons for reporting as Chipwood.
COLUMN D. Ton Value. Enter the ton value for Chipwood and Small Logs from the proper haul zone in the Stumpage Value Table. Enter the appropriate destination code or codes for Chipwood from the published destination table. If you are reporting scaled/sample scaled utility as Chipwood, your "destination code" will be 99.
Chipwood and Small Logs Destination Codes. Use the following two digit codes for reporting Chipwood:
01 Logs chipped in the woods
03 Boise Cascade (Umatilla, OR)
05 Brady Chip (Shelton)
07 Bullfrog (Cle Elum)
08 Cavenham (Cathlamet)
10 Coastal Fibre Inc. (Arlinton)
09 Columbia Fiber (Kalama)
12 Colville Valley Fibre (Colville)
06 Crown Pacific Inland (Coeur d' Alene, ID
11 DaPaul (Tumwater)
13 Diashowa (Port Angeles)
14 Citifor Inc. (Port of Olympia)
15 D K Truck (Beaver)
16 D K Truck (Hoquiam)
17 D K Truck (Montesano)
18 D K Truck (Quinault)
19 D K Truck (Shelton)
21 Dodge Logging Inc. (Glenwood)
23 Douglas County Forest Products (Centralia)
25 Edman Company (Tacoma)
26 Edman Company (Road 6 Kapowsin)
53 Evergreen Fiber (Irondale)
27 Fladgate & Woodworth Log (Canada)
28 Georgia Pacific (Bellingham)
30 Granger Company (Clarkston)
32 James River Corporation (Wauna, OR)
33 John Chopot Lumber Co. (Colville)
43 Local Manufacturing (Aberdeen)
65 Longview Fibre Co. (Winton)
34 Mountain Fir Chip Co. (Clarkston)
35 Mountain Fir Chip Co. (The Dalles, OR)
37 North Mason Fiber (Belfair)
39 Northwest Forest Fiber (Morton)
40 Northwest Forest Fiber (North Bend)
41 Northwest Forest Fiber (Tacoma)
42 Northwest Forest Fiber (Birdsview)
45 Oakville Forest Products (Oakville)
47 Olympic Fiber (Aberdeen)
49 Pacific Fiber (Longview)
50 Plum Creek Timber Co., LP (Arden)
51 Ponderay Valley Fiber (Usk)
55 Rayonier Pulp (Port Angeles)
59 S. V. Pullin, Inc. (Shelton)
57 Scott Paper (Everett)
62 Trans Coastal Trading Inc. (Canada)
66 Vaagen Brothers Lumber Co. (Colville)
60 Warrenton Fiber or Nygards (Warrenton, OR)
61 Weyerhaeuser Silvacel (Snoqualmie Falls)
63 Weyerhaeuser Co. (Material Recovery Transfer Facility, Longview)
64 Woodchip Inc. (Black Diamond)
70 Zosel Lumber Co. (4 miles south of Oroville)
99 Scaled Utility
Small logs are conifer logs generally measuring seven inches or less in scaling diameter, delivered to and purchased by weight measure at the following facilities. Use the following two digit codes:
81 Longview Fibre Co. (Winton)
83 Vaagen Brothers Lumber Co. (Colville)
85 Vaagen Brothers Lumber Co. (Republic)
86 Vaagen Brothers Lumber Co. (Ponderay Valley)
COLUMN G. Taxable Tonnage Value. Multiply the volume in Column C times the ton value in Column D and enter the figure in Column G. (Column C times Column D equals Column G).
BLOCK 17. Total Taxable Value. Add lines 1 through 9 of column G in Block 15 and the two lines of Column G in Block 16 and enter this total in Block 17.
Transfer to the "Total Taxable Stumpage Value" column on the Summary Sheet opposite the correct Section, Township and Range.
RETURN SUMMARY INSTRUCTIONS
ERRORS AND OMISSIONS
If there are errors or omissions in the pre-printed information on the Summary Sheet, line out the errors. Enter corrections on the blank lines.
SECTIONS WITH NO HARVEST
A column indicating (ü) NO HARVEST is on the Summary Sheet. Check this column if no harvest occurred on a specific section.
CLOSING YOUR FOREST EXCISE TAX ACCOUNT
Two columns indicating "check (ü) to close" are on the Summary Sheet.
Close Section. Check only if the specific section should be closed.
Close DNR Application (Permit) Number. Check only if all sections for this specific application number are to be closed. CAUTION: A closed DNR number indicates that harvest is totally completed for all sections on the application and the tax has been paid. If the application has been transferred, please write in new ownership.
Grand Total Stumpage Value. Add the total taxable stumpage value column. Enter the amount in the Grand Total Stumpage Value block at the bottom of the Summary Sheet.
Tax Due. Multiply the Grand Total Stumpage Value amount by the current rate (.05) and enter the tax due in this block. Please round the tax due to the nearest dollar. If the tax due is less than $50.00, do not pay. However, the return must be completed and mailed.
Previous Credit. When entering credit(s), attach a copy of the credit note(s) to your tax return.
Penalty is computed as follows: "Tax Due" minus any previous credit, multiplied by the appropriate penalty percentage rate. Please round the penalty amount to the nearest dollar. The minimum amount of penalty is $5.00 for any late filing. Return must be postmarked by the due date to avoid penalties.
Total Payment Enclosed. Tax due minus previous credit, plus penalty equals total payment. Please round total payment to the nearest dollar. Make check payable to: DEPARTMENT OF REVENUE.
Signature and Telephone Number. Sign your name in the signature space. Enter your daytime telephone and area code number. Enter the date.
WAC 458-40-650 Timber excise tax--Timber quality codes defined. The timber quality code numbers for each species of timber shown in the stumpage value tables contained in this chapter are defined as follows:
| TABLE 2--Timber
Quality Code Table
Stumpage Value Areas 6 and 7
Quality Code Number
|Log Grade Specifications|
|Less than 10 logs 16 feet long per thousand board feet Scribner scale.|
|10 or more logs 16 feet long per thousand board feet Scribner scale.|
|All Conifers other than Ponderosa Pine||
|All log sizes.|
|All conifer logs that comply with the definition of small logs in WAC 458-40-610 (18)(e).|
|All logs that comply with the definition of chipwood in WAC 458-40-610 (18)(d).|
|All logs that comply with the definition of piles in WAC 458-40-610 (18)(g).|
|All logs that comply with the definition of poles in WAC 458-40-610 (18)(h).|
TABLE 2--Harvest Adjustment Table
Stumpage Value Areas 6 and 7
July 1 through December 31, 1996
|Type of Adjustment||
Dollar Adjustment Per Thousand Board Feet Net Scribner Scale
|I. Volume per acre|
|Harvest of more than 8 thousand board feet per acre.||
|Harvest of 3 thousand board feet to 8 thousand board feet per acre.||
|Harvest of less than 3 thousand board feet per acre.||
|II. Logging conditions|
|Most of the harvest unit has less than 30% slope. No significant rock outcrops or swamp barriers.||
|Most of the harvest unit has slopes between 30% and 60%. Some rock outcrops or swamp barriers.||
|Most of the harvest unit has rough, broken ground with slopes over 60%. Numerous rock outcrops and bluffs.||
|For logs which are yarded from stump to landing by helicopter. This does not include special forest products.||
|III. Remote island adjustment:|
|For timber harvested from a remote island||
For conversions not found in this reference call 1-800-548-8829.
WAC 458-40-686 TIMBER EXCISE TAX - VOLUME HARVESTED - CONVERSIONS TO SCRIBNER DECIMAL C SCALE FOR EASTERN WASHINGTON. The following definitions, tables, and conversion factors shall be used in determining taxable volume for timber harvested that was not originally scaled by the Scribner Decimal C Log Rule. Conversion methods, other than those listed are not to be used for tax reporting purposes without prior written approval of the Department.
(1) WEIGHT MEASUREMENT. If the original unit of measure was by weight, and the harvester has not applied for approval of sample scaling (WAC 458-40-682); the following table shall be used for converting to Scribner Decimal C. Harvesters must keep records to substantiate the species and quality codes reported. For tax reporting purposes, a ton equals 2,000 pounds.
(Stumpage Value Areas 6 & 7)
Board Foot Weight Scale Factors
|Ponderosa Pine (quality code 1)||5.0|
|Ponderosa Pine (quality code 2)||6.5|
(2) CORD MEASUREMENT. A cord is a measure of wood with dimensions of 4 feet by 4 feet by 8 feet (128 cubic feet.)
(a) Logs with an average scaling diameter of 8 inches and larger shall be converted to Scribner volume using 470 board feet per cord. Logs having an average scaling diameter of less than 8 inches shall be converted to Scribner volume using 390 board feet per cord.
(b) A cord of Western Redcedar shake or shingle blocks shall be converted to Scribner volume using 600 board feet per cord.
(3) CANTS OR LUMBER FROM PORTABLE MILLS. To convert from lumber tally to Scribner volume, multiply the lumber tally for the individual species by 88% and round to the nearest one thousand board feet (MBF).
(4) EASTERN, WESTERN LOG SCALE CONVERSION. Timber harvested in stumpage value areas 6 and 7, which has been scaled by methods and procedures published in the "Official Log Scaling and Grading Rules" handbook, developed and authored by the Northwest log rules advisory group, shall have the volumes reported increased by eighteen percent to reflect the difference between eastern and western scaling practices.
(5) TIMBER POLE VOLUME TABLE. Harvesters of poles in stumpage value areas 6 & 7 in need of the Scribner board foot volume for each pole length and class:
Click here for Timber Pole Volume Tables
CONTACT THE DEPARTMENT OF REVENUE, SPECIAL PROGRAMS