WAC 134

Revised Codes of Washington (RCW)
Document Reference Description Date of Issue Status
82.04.100

Extractor

82.04.110

Manufacturer.

82.04.130

Commercial or industrial use.

82.04.190

Consumer.

82.04.210

Byproduct.

82.04.280

Tax on printers, publishers, highway contractors, extracting or processing for hire, cold storage warehouse or storage warehouse operation, insurance general agents, radio and television broadcasting, consumer as defined in RCW 82.04.190(6)--Cold storage warehouse defined--Storage warehouse defined--Periodical or magazine defined.

82.12.010 (1)

Definitions.

Washington Administrative Codes (WAC)
Document Reference Description Date of Issue Status
458-20-134

Commercial or industrial use.

458-20-134

WAC 458-20-121 provides tax reporting information for persons who sell heat and/or steam. It also provides information on the use tax liability of persons that produce fuel used to produce heat or steam. WAC 458-20-134 discusses the taxability of manufacturers and extractors that are consumers of products or by-products that they themselves have manufactured or extracted. The Department amended these rules to recognize provisions of Chapter 469, Laws of 2009 (Engrossed Substitute Senate Bill 6170).

Excise Tax Advisories (ETA)
Document Reference Description Date of Issue Status
21.12.134

VALUE OF MATERIALS USED BY PRODUCER IN PERFORMANCE OF PUBLIC ROAD CONTRACT -Cancelled effective December 29, 2006 This document addresses a situation where a taxpayer produces and sells asphalt mix to a county and also uses asphalt mix as a consumer in performing public road contracts. It explains that the measure of tax for the mix used by the taxpayer as a consumer is not necessarily the price at which the taxpayer sells mix to the county.

240.12.134

USE AND MANUFACTURING TAX ON PRODUCTION OF MOLDS USED TO PRODUCE FINISHED PRODUCT Cancelled Effective 03/28/08. This document explains that a manufacturer who manufactures a single-use mold is subject to the manufacturing B&O tax and use tax on the value of the mold. While this document accurately reflects the Department’s interpretation of the law, it fails to recognize the exemption from retail sales and use tax for manufacturing machinery and equipment (WAC 458-20-13601).

3152.2009

Off-site component fabrication by speculative builders

404.04.134

OFF-SITE COMPONENT FABRICATION BY SPECULATIVE BUILDERS Revised 2/2/09 See ETA 3152.2009

98.12.134

OVERHEAD COSTS IN COMPUTING VALUE ON A COST BASIS - Cancelled effective December 29, 2006 This document addresses the measure of use tax for catalogs manufactured by a department store and sent to its customers. It explains that where a retail selling price of similar products is not available, the use tax is due on a cost basis, including direct and indirect overhead costs. This issue is adequately addressed in WAC 458-20-112, 458-20-134, and other documents (e.g., WTDs) issued by the Department.

Special Notices (SN)
Document Reference Description Date of Issue Status
N/A

Business and Occupation Tax Credit for Harvesters of Forest-Derived Biomass Continues

N/A

Tax Incentive on Sales and Purchases of Hog Fuel and Forest-Derived Biomass

N/A

Tax Incentive on Sales and Purchases of Hog Fuel and Forest-Derived Biomass

N/A

Sales/Use Tax Exemption on Purchases of Hog Fuel Extended: Annual Tax Incentive Survey Required

Washington Tax Decisions (WTD)
Document Reference Description Date of Issue Status
10 WTD 71

USE TAX -- B&O TAX -- TOOLING-COMMERCIAL OR INDUSTRIAL USE.Tooling made by a manufacturer who uses it to make airplane parts is subject to Use Tax and Manufacturing B&O tax.

12 WTD 509

MFG TAX -- USE AND/OR DEFERRED SALES TAX -- MANUFACTURING FOR OWN USE -- INTERMEDIATE STEPS -- SILK-SCREENING.The creation of silk-screens by a sign maker was found to be an intermediate step in the printing process.Therefore, manufacturing B&O tax was not due on the value of the screens and use and/or deferred sales tax was due only on the materials consumed.

12 WTD 73

USE TAX -- WINERY -- WINE SAMPLES -- DEFECTIVE BOTTLES -- MEASURE OF TAX.The measure of use tax on damaged or "off condition" bottles of wine used to pour samples at the tasting room of a winery is the retail selling price, if it can be determined, of such "off condition" bottles as opposed to the retail selling price of undamaged bottles of the same wine.

19 WTD 753

MANUFACTURING AND USE TAXES -- COMMERCIAL OR INDUSTRIAL USE -- DEPT. OF DEFENSE CONTRACTOR -- VALUATION.Smelting pots manufactured for commercial and industrial use by an aluminum company were not entitled to the lower Department of Defense contractor valuation when the pots were used to manufacture only raw materials which were then transferred to another division for manufacture into products and only a very small percentage of those products were sold to the Department of Defense.

19 WTD 753

B&O & USE TAX -- COMMERCIAL OR INDUSTRIAL USE-- SMELTING POTS A manufacturer owes additional manufacturing B&O taxes and use taxes on steel smelting pots manufactured for commercial or industrial use even though some materials used to line the pots were exempt ingredients or components or chemicals used in processing.

2 WTD 219

USE TAX - MANUFACTURED PROPERTY - COMMERCIAL OR INDUSTRIAL USE - SIGNS - DISPLAY MATERIALS.A taxpayer which manufactures signs for its own use in its retail stores is liable for use tax on the "value of the articles so used."

2 WTD 219

BUSINESS AND OCCUPATION TAX - MANUFACTURING - COMMERCIAL OR INDUSTRIAL USE - SIGNS.A taxpayer primarily engaged in retailing, which internally produces signs and other display materials for use in its stores, is engaged in manufacturing under the business and occupation tax.

2 WTD 219

USE TAX - MANUFACTURED PRODUCTS - COMMERCIAL OR INDUSTRIAL USE - MEASURE - "VALUE OF THE ARTICLES USED" - COSTS.When it is not possible to determine the "retail selling price, at the place of use, of similar products of like quality, quantity and character," under the provisions of Rule 178, the standard of determining value on a cost basis as set forth in Rule 112 may be used.The fact that salaries and other overhead may account for a substantial portion of such costs does not render the tax to be a tax on salaries or other intangibles.

2 WTD 219

BUSINESS AND OCCUPATION TAX - MANUFACTURING - COMMERCIAL OR INDUSTRIAL USE - MEASURE - "VALUE OF PRODUCT" - COSTS.When it is not possible to determine with any reasonable accuracy the "gross proceeds from other sales at comparable locations in this state of similar products of like quality and character," the Department may determine the "value of product" on cost basis.The fact that salaries and other overhead may be a substantial portion of those costs does not render the tax to be a tax on salaries and other intangibles.

22 WTD 193

MANUFACTURING B&O TAX - USE TAX - STEVEDORING COMPANY - DOCKSIDE RAMP.Where a stevedoring company that leases a port facility adjacent to a navigable body of water builds a large ramp on the leased property, moves the ramp to the water's edge, and attaches it to the realty, it has not engaged in a taxable manufacturing activity.Use tax is due only on the materials used to construct the ramp.

4 WTD 351

B&O -- MANUFACTURING -- COMMERCIAL OR INDUSTRIAL USE.In order to be taxed as a manufacturer of an article for the manufacturer's own commercial or industrial use, there must be a distinct and separate use of the article after the manufacturing has been completed.The very act of manufacturing an article is not using that article for commercial or industrial purposes.

5 WTD 107

B&O -- MANUFACTURING -- MEASURE OF TAX -- VALUE.The value of an article manufactured for commercial use is the total cost attributed to the article, at the time the manufacturing is completed.

7 WTD 43

USE TAX -- EXEMPTION -- FUEL USED BY ITS MANUFACTURER -- ICE USED FOR COOLING. The use of ice by its manufacturer to cool a product or a work area is not use as a fuel.Such use is not exempt of use tax.

8 WTD 157

MANUFACTURING TAX-- DEFINITION -- REMANUFACTURING ENGINES -- INTERSTATE DEDUCTION.The activity of remanufacturing used engine cores into remanufactured engines was found to constitute manufacturing within the definition of RCW 82.04.120 and WAC 458-20-136 (Rule 136). Therefore sales of remanufactured engines sold and delivered outside the state could not be deducted as interstate sales.

8 WTD 445

USE TAX -- MEASURE OF -- PRINTED MATERIALS.A county government which makes and uses printed materials is liable for use tax on the total value of such materials which value includes labor and overhead costs expended in the printing thereof.

8 WTD 69

USE TAX -- MANUFACTURING FOR OWN USE -- BONA FIDE SALE -- RETAIL SELLING PRICE -- ARMS LENGTH TRANSACTION -- VALUATION.Where the taxpayer manufactures molds for industrial use, a bona fide sale of the molds has not been made to the user of the item manufactured.Therefore use tax is computed at the retail selling price of similar products of like quality and character provided that such sales price results from an arms length transaction which is separately and independently negotiated.Where it is not possible to obtain the selling price of similar products of like quality and character, cos